Daily maintenance methods of lathes.
The following lists several general daily maintenance tasks.
- Clean and lubricate the guide surfaces. Lathes with automatic lubrication systems should be checked regularly, clean the automatic lubrication system, check the oil level, add lubricating oil in time, and check whether the oil pump is started and stopped regularly.
- Check whether the automatic lubrication system of the spindle box is working normally every day, and replace the spindle box lubricating oil regularly.
- Pay attention to check whether the cooling fan in the electrical cabinet is working normally, whether the air duct filter is blocked, and clean the adhered dust.
- Pay attention to check the cooling system, check the liquid level, add oil or water in time, and replace and clean the oil or water when it is dirty.
- Pay attention to check the spindle drive belt and adjust the tightness.
- Pay attention to check the tightness of the guide rail strip and adjust the gap.
- Pay attention to check whether the oil tank and oil pump of the lathe hydraulic system have abnormal noise, whether the working oil level is appropriate, whether the pressure gauge indicates normal, and whether there is leakage in the pipeline and joints.
- Pay attention to check whether the lathe protective cover is complete and effective.
- Pay attention to check the mechanical accuracy of each moving part to reduce shape and position deviation.
- Clean the lathe before leaving work every day, clean the chips, wipe the coolant on the guide rail, and prevent the guide rail from rusting.
If you have any questions, feel free to contact us.
E-mail: cykc@cykcgroup.com.cn